Customrized steel structure Pig Farm house with raising equipment

Pig house is one of the necessary conditions for the survival of the herd, through the construction of scientific and reasonable pig house, to provide an ideal growth space for pigs in pig production is essential. Environmental factors directly affect the pig herd health, such as temperature, humidity, air velocity, air quality, pig manure treatment space, etc., these factors impact on the herd is directly exposed to built structure.

Technical requirements for sow stalls:
1. 2.2mx0.6m*1.1m, front and rear doors are opened, and the front door is inclined.
The raw material is a φ26x2.5mm tube, the bottom of the horizontal direction is φ26x2.5mm, the center of the tube is φ21x2.5mm, the middle is a gear circle φ26x2.5mm reinforced round tube, the side rails are vertical and horizontal, and the front and rear doors are fixed by lock Style, easy to open.

2. The front and rear doors are made of φ26x2.5mm round pipes, the inner support ribs of the front door are φ21x2.5mm round pipes, and the back door has a U-shaped opening for personnel to enter.

3. The top of the rail is fixed with two round tubes of φ26x2.0mm finished heat pipe.

Boar Pen:
1. 1.2m high, including gates. The upper material is Φ33x2.5mm round tube (wall thickness is not less than 2.3mm), the vertical direction of both ends of the fence is 40x6 flat steel (thickness is not less than 5.6mm), and the lowest horizontal direction is a Φ33x2.5mm round tube (wall The thickness is not less than 2.3mm), and the middle part is a Φ21x2.3mm round tube.
2. The blanking pipe φ60mm wall thickness 2.2mm is installed on the side rail (the wall thickness is not less than 2.2mm), and can be welded to the side rail as a whole.
3. Equipped with a single trough.